Disque dur introuvable / Informations sur le disque dur et formatez-le
Veuillez vous référer à ce qui suit pour résoudre le problème du disque dur introuvable.
1. Si le disque dur a été préinstallé, il y a 4 vis au bas du boîtier NVR.
2. Vérifiez l'adaptateur secteur pour confirmer s'il dispose de suffisamment de puissance ou non.
Remarque : le NVR WiFi (8208,8204,9604,9608,8508,8708) doit utiliser une alimentation 12 V 2,5 A.
Le NVR PoE (6708FN, 6708KR, 6708K) doit utiliser un adaptateur d'alimentation 52 V 2,5 A.
3. Veuillez ouvrir le NVR avec un tournevis, vérifiez les deux câbles reliant le disque dur et voyez s'ils sont desserrés.
4. Retirez le disque dur et installez-le sur votre ordinateur. Vérifiez si l'ordinateur peut reconnaître le disque dur.
Vérifiez les informations du disque dur sur le boîtier NVR et formatez-le
Cliquez avec le bouton droit de la souris > Configuration du système > Configuration générale > Configuration du disque dur > Sélectionnez le disque dur > Cliquez sur Formater
9 commentaires
?I have same issue…HD stopped being recognized when it got FULL.
But I am able to reformat/partition..etc when I attache to computer…..I have WIPED and brought to NEW state….but still not recognize…. I have installed TEMP smaller hd from another computer and if recognizes just Like prev comment.
WHY would original HD no longer be recognized…fyi..my original had 3TB
I am having the same issues. Perfectly fine HDDs will most recognize on these NVRs and I bought a new NVR in case but it did the same thing…. what can we do here since I have a whole system setup and the HDD wont work….
Good afternoon! I have been using your NVR device model K8204-W for four years now. Recently, the power supply failed and I replaced it. Since the reason could not be immediately established, initially, I replaced the hard drive, which did not lead to an effect. Now, I need an access code for the administrator to configure it. Unfortunately, the previously installed code does not work. I ask for your help and assistance in solving this issue and sending the code to me!
I have a purchased a NVR POE 4channels and i have conected to NVR I have installed an 1TB hard drive and the drive is not recognized, the drive is suitable for this task even is formatted in NTFS with no partitions but it can’t be read, instead I have installed an old drive with 80Gb the two drives manufactured by Seagate and this is recognized and promt to format the drive and is done and can save the videos but I can make it to the big drive I have mounted both in my pc and both are usable I can write/delete files.
Meanwhile I will try with the 80Gb drive an set the cameras to lower quality to avoid data overwritting, waiting for a fix for this from you, or maybe is a firmware update to do in the NVR.