Techage 4CH AHD Video DVR720P CCTV System 4PCS 1200TVL IR Outdoor Camera Security Camera Night Vision Surveillance Kit

  • Overview
  • Specification
  • Faq



720P high resolution, the image is more clear and delicate;

Zero-latency data transmission, full real-time, high fidelity;

Long transmission distance, coaxial transmission up to 500 meters;

Support UTC, enable OSD by the back-end;

Support coaxial upgrade, version upgrade convenient and efficient;

Compatible with AHD/TVI/CVI backend;

Support XVI, image quality is better;

NTSC&PAL 2 in 1, easy to switch through back-end;

High-definition quality products with competitive price.


Model of the ModuleXAG-50X10PT-M


Specifications

XAG-50X10PT-M

ISP

XM330

Sensor

1/4 inch H62 sensor

Signal format

XVI/TVI/CVI

Video Resolution

PAL/NTSC: 1280*720

Minimum Illumination

color: 0.1Lux@(F1.2, AGC ON), 0Lux with IR

Black & White: 0.01Lux@ (F1.2, AGC ON), 0Lux with IR

Photosensitive Resistance

1 photosensitive resistance interface, support the photosensitive resistor input signal and image, IR-CUT, infrared lamp linkage

Shutter

1/50(1/60) seconds to 1/10,000 seconds

Day and Night Function

Support IR-CUT

Lens Parameters

C/CS interface, M12 lens optional

Video output

720P@25fps

Power

DC12V±10%

Temperature and Humidity

- 10 ~ 60 , humidity is less than 90% (no condensation)

Consumption

<5W

Size

Standard 32*32 positioning hole, compatible with 38*38 hole

Remarks

Support UTC, coaxial upgrade

1. Is there a pc firmware that I can use to view the cameras? 

Yes. The firmware is called CMS. You can download it here: https://pan.sohu.net/f/MTY4MTUsaGR1aHE.htm

2. How to add device to CMS? 

First you need to make sure the DVR/NVR and the computer connect to the same router.

    1) Double click on CMS icon to run it. A login window will show up.

    2) Click “OK” when small window comes out.

    3) Click “System” – Click “Device Manager” – “Zone List” – “Add Area” – name the zoon, e.g. “front door” – “OK".

    4) Click on the zone name “front door” – “Add Device” –a new window, click “IP Search”

    5) Click the IP of the DVR/NVR, click “Add Device” – If you have set your own admin and password, fill in your own, if not, leave it blank and click “OK”. Successfully add!

    6) Now you can see on the upper left corner, there is an added IP address. Double click on this IP address, it will show many sub-channels.

    7) Double click on the sub-channel and it will show live video of it.

    8) You can access more settings by clicking on "System"-"Local Config" or "Remote Config"
Here are the illustrations to help you understand better: